When you mirror iPhone to Roku, all you’re really doing is duplicating your screen on the TV or projector. Remember that, both your iPhone/iPad and the Roku TV must be on the same Wi-Fi network. The setup doesn’t need any wires or cables, however, you have to be connected to a Wi-Fi network. Roku screen mirroring simply means sharing your iPhone/iPad device screen onto your Roku TV. It’s something that we just have to deal with. I love Apple and Apple products as much as the next guy, but Apple’s compatibility with non-Apple products has always been poor. IPhone screen mirroring on TV isn’t that simple without an Apple TV.ĭon’t get me wrong. It’s best to buy at least a few more inches than you need to account for cut pieces and mistakes.So you bought yourself a Roku TV and wanted to stream something on it from your iPhone. Doubling means 23 inches and 48 inches of wood respectively. For instance, the width of this monitor is 11 and a half inches, and the length is 19 and a half inches. That final number is the total length of wood you will need. Write those down, and double the numbers. Measure either along the metal frame on the innards or the inside edge of the frame if you didn’t take it apart. Once you have the frame removed (or if you’re skipping that step), measure the length of the monitor and the width inside the edges of the screen. You should have something like this when you finish: Josh Hendrickson / How-To Geek Determining Wood Measurements You’ll want to look for seams along the edge to pry apart, and every step of the way try to be gentle. Every monitor is different, so we can’t give exact instructions here. If you plan to remove the frame from your monitor, you’ll want to do that now. The size of your monitor determines the size of your glass and the length and width of the wood you need. The first step to building your frame starts with your monitor. When completed, the structure might resemble a very shallow medicine cabinet. Then you’ll add a simple box to hold the mirror, monitor, Raspberry Pi, and cabling. To start, you’re going to make a basic frame (like the one you might find hanging on your wall). Hook and loop sandpaper in 80, 120, and 220 grits.These are not necessary, but they’ll help:
How much wood and how wide depends on your monitor (see more in building the frame.)įor a more straightforward build, we have a few advanced options. You’ll also want something thin like plywood to make the back of the box if you aren’t hanging the frame. Wood to build the frame and box: We recommend hardwood like Maple or Walnut at least one inch thick.Add a vapor filter if you’re applying polyurethane without ventilation. A ruler or other straight edge (for drawing straight lines).A miter saw (or handsaw and protractor).Sandpaper in 80, 120, and 220 grit (omit 220 if you decide to paint).Wood filler (if staining, get stainable wood filler).The product we linked on Amazon is a generic size, but we had good luck ordering from a local glass supplier. Two-way Glass: Your glass should be a little larger than the dimensions of your monitor.It’s also helpful (but not necessary) to remove the frame from the monitor. Something thinner and lighter is better, but this monitor by Sceptre would work. A monitor: Preferably at least 24 inches, and one you don’t care about losing.To get started you’ll need the following: If you have a friend who owns some, ask if you can borrow them. And remember, you don’t have to buy the tools. But because we had everything on hand except the glass and wood, we only spent $140.
If you bought every item in the following list, you’d spend around $700. The Materials You’ll Needĭepending on what you already have, this project can either be inexpensive or expensive. You’ll spend about three to five hours actively working on the frame and installing the software.Īnd we’ll show you exactly how. The longest parts are passive, like waiting for glue and stain to dry.
#Smart mirror for roku code
But even someone with little to no experience with woodworking and code can build this DIY project with a bit of patience in a weekend or two.
#Smart mirror for roku software
The harder parts are creating the frame box, setting up the Raspberry Pi, and then customizing the software to show your preferred information. Installing the software is easy-it requires just one line of code. Once installed, you can customize it to show your calendar, weather, news, and more. Michael and other contributors have created an open-source Magic Mirror platform you can install. Inside the box, you’ll place one-way glass (often seen on TV in police dramas), a monitor, a Raspberry Pi, and the cables necessary to power your setup. The idea is pretty simple you’ll build a frame and box. Smart mirrors have been around awhile, and the most prominent version comes from Michael Teeuw. Beautiful, Configurable, and Custom-Built Josh Hendrickson / How-To Geek
0 kommentar(er)
